[
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-0-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 0,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 53.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 52.745,
   "high": 54.307,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-0-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 0,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 53.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 52.745,
   "high": 54.307,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-0-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 0,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 53.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 52.745,
   "high": 54.307,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-20-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 67.67,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 66.494,
   "high": 68.795,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-20-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 67.67,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 66.494,
   "high": 68.795,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-20-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 67.67,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 66.494,
   "high": 68.795,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-40-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 81.81,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 80.244,
   "high": 83.321,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-40-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 81.81,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 80.244,
   "high": 83.321,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-40-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 81.81,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 80.244,
   "high": 83.321,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-60-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 95.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 93.993,
   "high": 97.847,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-60-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 95.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 93.993,
   "high": 97.847,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-60-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 95.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 93.993,
   "high": 97.847,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-80-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 110.09,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 107.742,
   "high": 112.373,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-80-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 110.09,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 107.742,
   "high": 112.373,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-80-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 110.09,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 107.742,
   "high": 112.373,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-100-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 100,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 124.23,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 121.492,
   "high": 126.898,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-100-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 100,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 124.23,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 121.492,
   "high": 126.898,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-100-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 100,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 124.23,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 121.492,
   "high": 126.898,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-120-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 120,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 138.38,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 135.241,
   "high": 141.424,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-120-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 120,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 138.38,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 135.241,
   "high": 141.424,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-120-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 120,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 138.38,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 135.241,
   "high": 141.424,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-140-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 140,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 152.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 148.99,
   "high": 155.95,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-140-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 140,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 152.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 148.99,
   "high": 155.95,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-140-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 140,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 152.52,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 148.99,
   "high": 155.95,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-160-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 160,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 166.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 162.74,
   "high": 170.476,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-160-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 160,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 166.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 162.74,
   "high": 170.476,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-160-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 160,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 166.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 162.74,
   "high": 170.476,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-180-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 180,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 180.8,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 176.489,
   "high": 185.001,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-180-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 180,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 180.8,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 176.489,
   "high": 185.001,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-180-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 180,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 180.8,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 176.489,
   "high": 185.001,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-200-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 200,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 194.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 190.238,
   "high": 199.527,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-200-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 200,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 194.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 190.238,
   "high": 199.527,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-200-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 200,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 194.95,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 190.238,
   "high": 199.527,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-250-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 250,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 230.3,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 224.611,
   "high": 235.841,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-250-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 250,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 230.3,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 224.611,
   "high": 235.841,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-250-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 250,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 230.3,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 224.611,
   "high": 235.841,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-300-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 300,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 265.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 258.985,
   "high": 272.156,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-300-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 300,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 265.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 258.985,
   "high": 272.156,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-300-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 300,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 265.66,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 258.985,
   "high": 272.156,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-400-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 400,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 336.37,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 327.731,
   "high": 344.784,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-400-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 400,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 336.37,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 327.731,
   "high": 344.784,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-400-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 400,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 336.37,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 327.731,
   "high": 344.784,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-500-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 500,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 407.08,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 396.478,
   "high": 417.413,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-500-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 500,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 407.08,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 396.478,
   "high": 417.413,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-500-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 500,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 407.08,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 396.478,
   "high": 417.413,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-600-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 600,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 477.79,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 465.224,
   "high": 490.042,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-600-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 600,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 477.79,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 465.224,
   "high": 490.042,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-600-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 600,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 477.79,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 465.224,
   "high": 490.042,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-700-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 700,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 548.5,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 533.971,
   "high": 562.67,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-700-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 700,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 548.5,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 533.971,
   "high": 562.67,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-700-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 700,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 548.5,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 533.971,
   "high": 562.67,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-800-start",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 800,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 619.21,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 602.717,
   "high": 635.299,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-800-mid",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 800,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 619.21,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 602.717,
   "high": 635.299,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-hammer-strength-plate-loaded-linear-leg-press-800-end",
  "machine_id": "hammer-strength-plate-loaded-linear-leg-press",
  "setting": {
   "kind": "plates_added",
   "value": 800,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 619.21,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 602.717,
   "high": 635.299,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "hammer-strength-plate-loaded-linear-leg-press",
   "doc": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/hammer-strength-plate-loaded-linear-leg-press.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-10-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 10,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 10,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 9.216,
   "high": 10.851,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-10-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 10,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 10,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 9.216,
   "high": 10.851,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-10-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 10,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 10,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 9.216,
   "high": 10.851,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-20-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 20,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 18.432,
   "high": 21.701,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-20-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 20,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 18.432,
   "high": 21.701,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-20-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 20,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 20,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 18.432,
   "high": 21.701,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-30-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 30,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 30,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 27.648,
   "high": 32.552,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-30-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 30,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 30,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 27.648,
   "high": 32.552,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-30-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 30,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 30,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 27.648,
   "high": 32.552,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-40-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 40,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 36.864,
   "high": 43.403,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-40-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 40,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 36.864,
   "high": 43.403,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-40-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 40,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 40,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 36.864,
   "high": 43.403,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-50-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 50,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 50,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 46.08,
   "high": 54.253,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-50-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 50,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 50,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 46.08,
   "high": 54.253,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-50-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 50,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 50,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 46.08,
   "high": 54.253,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-60-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 60,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 55.296,
   "high": 65.104,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-60-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 60,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 55.296,
   "high": 65.104,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-60-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 60,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 60,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 55.296,
   "high": 65.104,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-70-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 70,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 70,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 64.512,
   "high": 75.955,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-70-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 70,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 70,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 64.512,
   "high": 75.955,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-70-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 70,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 70,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 64.512,
   "high": 75.955,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-80-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 80,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 73.728,
   "high": 86.806,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-80-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 80,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 73.728,
   "high": 86.806,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-80-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 80,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 80,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 73.728,
   "high": 86.806,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-90-start",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 90,
   "unit": "kg"
  },
  "position": {
   "rom_point": "start",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 90,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 82.944,
   "high": 97.656,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-90-mid",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 90,
   "unit": "kg"
  },
  "position": {
   "rom_point": "mid",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 90,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 82.944,
   "high": 97.656,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 },
 {
  "id": "est-technogym-selection-700-lat-machine-90-end",
  "machine_id": "technogym-selection-700-lat-machine",
  "setting": {
   "kind": "stack_pin",
   "value": 90,
   "unit": "kg"
  },
  "position": {
   "rom_point": "end",
   "note": "Model has no cam or lever: force is the same at start, mid and end of the range of motion."
  },
  "value": {
   "value": 90,
   "unit": "kg"
  },
  "uncertainty": {
   "low": 82.944,
   "high": 97.656,
   "unit": "kg",
   "kind": "bounds",
   "basis": "worst-case corners of every input band; low = lowering (eccentric) with max friction, high = lifting (concentric) with max friction"
  },
  "confidence": "estimated",
  "method": "mechanical-model",
  "derivation": {
   "model_id": "technogym-selection-700-lat-machine",
   "doc": "docs/models/technogym-selection-700-lat-machine.html"
  },
  "source": {
   "type": "mechanical_model",
   "url": "docs/models/technogym-selection-700-lat-machine.html",
   "submitter": "MachineConvert (model built from sourced inputs)",
   "date": "2026-10-17"
  },
  "moderation": {
   "status": "approved",
   "reviewed_by": "auto-check: every input sourced or flagged; awaiting validation by force-gauge measurement",
   "reviewed_at": "2026-10-17"
  }
 }
]